Applying window decals isn't difficult but can be a little tricky so make sure to take your time. We've included some additional resources to help you out.

Applying Window Decals (with pics)

1. Clean the area of the window where you're applying your decal with soap and water. Let this area completely dry.
2. Use masking tape to tape your decal to the window.
3. Use a tape measure to ensure your decal is straight and centered.
4. Place a long strip of masking tape down the middle of the decal.
5. Start from one end of the decal, and peel away the backing material until your reach the tape in the middle.
6. Cut off the backing material you just peeled away.
7. Pull tightly on your decal as you stick it to the window one section at a time while smoothing it with a white squeegee. If you don't have a white squeegee, you can use a credit card or your hand as a substitute. Smoothing out your decal helps to get rid of any air bubbles that may form.
8. Repeat steps 5-7 for the other end of your decal.
9. Once you have applied the entire decal to the window, carefully peel back the application tape by starting at a corner and pulling it at an angle.